- 3hp Induction Motor
- Cast Iron table saw
- 4’ Travel Sliding Beam
- Rip Fence with Micro Adjuster
- All Extension Tables Included
- Mitre Fence Included
Based on the best selling 10” Table Saw, Charnwood have increased the specification by adding a more powerful motor and a sliding beam with a 1220mm length of cut. This makes the saw ideal for handling large panels, anything up to an 8’ x 4’ sheet. The sliding beam of this table saw, runs on a set of bearings along a sturdy support bed with additional support legs at each end. This gives a very smooth action with a high degree of accuracy. The beam can be locked in position when using the rip fence.
The extension table is also supported by a telescopic arm to take the weight of larger panels. The squaring arm at the rear of the table can be adjusted at any angle up to 45 degrees and is fitted with a flip over stop for repeat measurements.
For crosscutting smaller pieces a mitre fence is also provided which locks onto the sliding beam and can be adjusted to any angle from 90 to 45 degrees.
- Main Table Size: 650mm x 620mm
- Maximum Ripping Width Using Fence: 610mm
- Support Table Size: 600mm x 450mm
- Maximum Crosscutting Width: 1225mm
- Blade Tilt: 90 - 45 degrees
- Cutting Depth at 90 degrees: 80mm
- Cutting Depth at 45 degrees: 56mm
- Blade Diameter: 250mm
- Blade Bore: 30mm
- Work Table Height: 830mm
- Motor (induction): 2200w (3hp) / 240v
- No-load Blade Speed: 4000rpm
- Minimum Blade Width (Kerf): 3.0mm
- Dimensions (WxDxH): 1330mm x 1500mm x 1120mm
- Weight: 170Kg
- Db (Without Load/With Load): 81Db/89.5Db
No details given.